SVAN 912AE - MULTI-FUNCTION HAND-HELD ANALYSER
|
 |
All products available from Acu-Vib Electronics
Overview
The SVAN 912AE is all digital, Type 1 sound & vibration meter and analyser. It is intended to acoustic measurements, environmental noise monitoring, occupational health and safety monitoring, human vibration measurements and machine health monitoring. It can be used by acoustic consultants and safety engineers, in Public Services, in acoustic laboratories, in industry, in R&D departments etc...
Now, using power of the new digital signal processors the SVAN 912AE can perform real time, narrow band (FFT) and 1/1 octave or 1/3 octave analysis (including statistical analysis) up to 45 kHz.
The SVAN 912AE has built-in all necessary weighting filters. Measurement results are displayed as RMS and Peak values, statistical diagram and level v. time or spectrum. Measurement results can now be stored in 4 or 8 MB Flash Disk and easy downloaded to any PC with the RS 232 interface and SvanPC software. New USB 1. 1 interface brings the totally new possibilities of the very fast link to the PC environment. It creates unique combination of the extremely powerful autonomic instrument and real time PC system. Additional interface with AES/EBU protocol ensures data exchange with other digital audio signal processing systems. Using this interface and SV 06A or SV 08A modules, the SVAN 912AE can be also expanded up to four-channel measurement system. Advanced measurement functions like: reverberation time, balancing of rotating mass, pure tone detection etc. will be available as options. Thanks to built-in rechargeable battery and rugged but lightweight construction, the SVAN 912AE can be used for field measurements in hard environmental conditions for at least eight hours.
The SVAN 912AE can be delivered with wide range of accessories that are necessary for sound and vibration measurements: microphones, microphone preamplifiers, sound level calibrators, accelerometers, calibration exciters, cables etc.
Features
 | Type 1 instrument conforming to: IEC 651, IEC 804, IEC 61672 and ISO 8041 |
| multi-function instrument |
| easy operation |
| built-in Flash disk |
| built-in rechargeable battery (operational time >8 h) |
| USB 1 .1 interface |
| RS 232 interface |
| AES/EBU interface |
| large LCD with backlight |
| handheld, robust case |
| light weight |
Main functions
Sound level meter / vibration meter
| noise measurements (SPL, Leq, SEL, Statistics) |
| infra and ultrasound measurements (1 Hz to 45 kHz) |
| acceleration, velocity and displacement measurements |
| human vibration measurements (meets ISO 2631 -1) |
|
four channel sound and vibration measurements (option with SV 06A or SV 08A) |
Real time analyser
| real time 1/1 octave and 1/3 octave analysis up to 45 kHz |
| 1/3 octave analysis concurrent to the Leq |
| narrow band frequency analysis (up to 1920 FFT lines) |
| digital ZOOM (down to 0.016 Hz resolution) |
| time domain signal recording and analysis (buffer for 400 K samples) |
| four channel frequency analysis (option with SV 06A or SV 08A) |
|
FUNCTIONS |
|
|
|
|
|
SOUND LEVEL METER |
|
|
(Type 1: IEC 651, IEC 804 and IEC 61672) Leq, Lmax, Lmin, LPeak (A, C, Lin and G filters in parallel), Spl, SEL, Statistics, Acoustic Dose (8h), Time History |
|
|
VIBRATION METER (Type 1: ISO 8041) |
|
|
RMS, RMSmax, RMSmin, Peak, Crest Factor for: acceleration, velocity and displacement, MTVV, VDV (RMQ detector) |
|
|
VOLTAGE METER |
|
|
RMS, RMSmax, RMSmin, Peak, Crest Factor |
|
|
ANALYSER |
|
|
Real time 1/1 and 1/3 octave analysis with statistics and multi‑spectrum recording up to 128 spectra/sec Real time, narrow band analysis (120, 240, 480, 960, and 1920 FFT lines) Digital ZOOM down to 0.016 Hz resolution Windows: rectangular, Hanning, Kaiser‑Bessel, Flat Top Averaging: linear, fast linear, exponential, hold max Display cursor: single, double, harmonic Transient analysis |
|
|
INPUT (7 pin LEMO compatible) selectable: |
|
|
Microphone preamplifier Piezoelectric vibration transducer (charge amplifier) IEPE accelerometer Direct (voltage) |
|
|
MEASUREMENT RANGE |
|
|
Sound: 22 dBA ‑ 140 dBA (with 50 mV/Pa microphone) Acceleration: I mm/s2 - 1000 m/s2 (with 10 pC/ms2 or 10 mV/ms2 accelerometer) Voltage: 5 µVRMS ‑ 10 VRMS |
|
|
DYNAMIC RANGE > 80 dB |
|
|
A/D conversion: 16 bits Sampling rate: 48 kHz or 96 kHz |
|
|
FREQUENCY RANGE (‑3 dB) 0.1 Hz ‑ 45.2 kHz |
|
|
BAND PASS FILTERS (Type 1: IEC 1260) |
|
|
16 1 /1 octave filters with centre frequencies from 1 Hz to 32 000 Hz 47 1/3 octave filters with centre frequencies from 1 Hz to 40 000 Hz |
|
|
WEIGHTING FILTERS (Type 1: IEC 651, ISO 8041) |
|
|
A, C, G, Lin, HP, WBxy, WBz, WBc, H‑A |
|
|
RMS DETECTOR |
Digital True RMS |
|
Dynamic range: Resolution: Integration time: |
140 dB with Peak detection 0.1 dB programmable up to 16 h |
|
TIME CONSTANTS |
|
|
Exponential: Linear: |
Impulse, Fast, Slow from 0.01 s to 1 s |
|
TRIGGER CAPABILITIES free run, internal, external |
|
|
MICROPHONE POLARISATION VOLTAGE |
|
|
0 V or 200 V |
|
|
DISPLAY |
|
|
LCD 128 x 128 pixels with EL backlighting |
|
|
MEMORY |
|
|
1 MB non‑volatile RAM and 4 or 8 MB Flash disk can store up to (4 MB version): 400 000 time samples 120 000 1/1 octave spectra or 40 000 1/3 octave spectra or 4 000 FFT spectra of 480 lines each |
|
|
SIGNAL SOURCE built‑in |
|
|
Pseudo Random Noise Generator (period 223 -1 |
|
|
ANALOGUE OUTPUT AC 1 VRMS |
|
|
INTERFACES |
|
|
USB 1.1 RS 232 AES/EBU (input and output in parallel) External interrupt input |
|
|
POWER SUPPLY |
|
|
Built‑in rechargeable battery 6 V / 3 Ah External power supply 8 ‑ 27 V DC 1800 mA |
|
|
ENVIRONMENTAL CONDITIONS |
|
|
Temperature: from ‑10 °C to +50 °C Humidity: up to 90 % RH, non condensed |
|
|
DIMENSIONS |
|
|
250 x 112 x 68 mm |
|
|
WEIGHT |
|
|
approx 1.8 kg (4 lb.0 with battery) |
|
SV912A with microphone
SV06 module
SV08 module
S912A and SV06A module with seat accelerometer
